HT/ArmaFlex
Flexible elastomeric insulation material specially purposed for high temperature applications
Material type
Factory-made flexible elastomeric foam based on et
Property | Value / Assessment | Standard / Test method | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Temperature range | ||||||||||
Service temperature1,2 |
| EN 14706, EN 14707, EN 14304 | ||||||||
Thermal conductivity | ||||||||||
Declared thermal conductivity |
| EN ISO 13787, EN 12667, EN ISO 8497 | ||||||||
Declared thermal conductivity |
| EN ISO 8497, EN ISO 13787, EN 12667 | ||||||||
Fire Performance and Approvals | ||||||||||
Reaction to fire | D(L)-s3,d0 (tubes)
D-s3,d0 (sheets, tape) | EN 13501-1, EN ISO 11925-2, EN 13823 | ||||||||
UL standards | ||||||||||
UL 94 V-04 | Pass | IEC 60695-11-10 | ||||||||
Fire performance | ||||||||||
Practical fire behaviour | Self-extinguishing, does not drip, does not spread flames. | |||||||||
Others | Class 1 | BS 476 Part 7 | ||||||||
Resistance to water vapour | ||||||||||
Water vapour diffusion resistance factor | ≥ 4.000 (tubes)
≥ 3.000 (sheets, tapes) | EN 12086, EN 13469 | ||||||||
Physical attributes | ||||||||||
Dimensions and tolerances | In accordance with EN 14304, table 1. | EN 822, EN 823, EN 13467 | ||||||||
Weather and UV resistance | ||||||||||
UV resistance5 | Very good | EN ISO 4892-2 | ||||||||
Health and environment | ||||||||||
Volatile organic compounds (VOC) content | Fulfills all VOC requirements (French, Italian, Belgian, German AgBB, Blauer Engel and Eurofins Indoor Air Comfort GOLD). | ISO 16000 Parts 3, 6 & 9 | ||||||||
Environmental Product Declaration (EPD) | Type III Environmental Product Declaration (EPD): Declaration number "EPD-ARM-20200222-IBA1-EN", Institut Bauen und Umwelt e.V. (IBU) | |||||||||
Green building assessment | Meets the sustainable construction requirements for LEED v4.1, BREEAM international, WELL v2 and DGNB. | |||||||||
Additional features | SCCP, MCCP-free | |||||||||
Other technical features | ||||||||||
AGI designation code | Tubes: 36.12.05.09.02
Sheets: 36.07.05.09.02 | |||||||||
Shelf life6 | Tape, self-adhesive: 1 year | |||||||||
Storage | Can be stored in dry, clean rooms at normal relative humidity (50% to 70%) and ambient temperature (0°C to 35°C). | |||||||||
1For temperatures above +125 °C or below -50 °C, please contact our Customer Service Centre to request for the corresponding technical information. 2At high service temperatures, a certain hardening process may start on the inner surface of the material. Investigations have shown that these changes have no impact on the good physical and fire protection properties of the material, provided the material is installed in a correct way with all its joints properly sealed. For specific applications please consult our technical service. 3+85 °C, for products with a self-adhesive layer. 4Only for products without self-adhesive-layer. 5Extended exposure to certain conditions could result in aesthetic changes to insulation material. This includes examples such as minor discolouration, surface cracks or hardening of inner surface material due to extended exposure to high service line temperatures. These physical changes do not affect the technical performance of the insulation material, such as thermal conductivity and behaviour in case of a fire. For further information, please contact our Technical Service department. 6Shelf life (maximum storage time) is limited to ensure that only currently manufactured products are installed on projects. This limitation is restricted solely to storage of the product and does not affect the lifetime of product after it has been installed. |